7" FMIC Intercooler Upgrade Fits 2007-2013 BMW 135i 335i N54 N55

Description

Product Description
2007-2013 BMW 135i/335i N54 & N55 7" Street Intercooler Upgrade Kit
Replace your overheated factory intercooler with the upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
7" FMIC Intercooler Upgrade Fits 2007-2013 BMW 135i 335i N54 N55
Product Description
2007-2013 BMW 135i/335i N54 & N55 7" Street Intercooler Upgrade Kit
Replace your overheated factory intercooler with the upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
Intercooler Core
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our custom bar and plate core design which utilizes a staggered and offset high density internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.
Our 5" core is recommended for those with goals of 300-500whp. We recommend our 7" intercooler for individuals requiring the utmost intake temperature reduction, ranging from the stock turbo setup to single turbo
100% brand new, never been tried of installed.
High Desnity Bar & Plate Core
Cast Aluminum End Tanks
Up to 80% larger than the OEM intercooler
Easy install, less than 2.5 hours
Dimensions: 7" - 20x5.75x7.125" / 5" - 20x8x5"
Professional installation recommended.
No instruction included.
Fitment：
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is
2008-2011 E82 BMW 135i
Package including：
1X FMIC Intercooler
As Pictures Show
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.
Our Store
Main Products
Promotion Items
Shop Category
Store Home
Exhaust Systems
◈  Exhaust Manifolds & Headers
◈  Exhaust Pipes & Tips
◈  Exhaust Tips
◈  Mufflers
◈  V Clamps
◈  Turbo Chargers & Parts
◈  Exhaust Wraps
◈  Exhaust cutout
Intake Systems
◈  EGR Valves & Parts
◈  Air Intake Systems
◈  Cylinder Heads & Parts
Timing Components
◈  Timing Chain Kit
◈  Timing Belt Water Pump Kit
◈  Control Solenoid Valve
Suspension & Steering
◈  Shocks & Struts
◈  Coil Springs
◈  Lift Kits & Parts
Chassis Parts
◈  Control Arms & Parts
◈  Control Arms & Parts-OEM
◈  Control Arms
◈  Sway Bars
◈  Caster/Camber Kits
Engines & Components
◈  Motor Mounts
Cooling Systems
◈  Fans & Kits
◈  Radiators & Parts
◈  Intercooler Piping Kit
Exterior
◈  Grilles
◈  Hoods
Brakes & Brake Parts
◈  Air Dryers
Interior
◈  Locks & Hardware
Automotive Repair Kits
◈  Other Automotive Tools & Suppl
◈  Diagnostic Service Tools
Other Parts
◈  Go Kart Parts
◈  Connectors & Terminals
Lighting & Lamps
◈  Xenon Lights
Gaskets
◈  Cyl. Head & Valve Cover Gasket
Hangers, Clamps & Flanges
◈  T Clamps
◈  Narrow Clamps
◈  Step Clamps
Transmission & Drivetrain
◈  Universal Joints & Driveshafts
Air Intake & Fuel Delivery
◈  Fuel Inject. Controls & Parts
Turbos, Nitrous, Superchargers
◈  Turbo Chargers & Parts
◈  Turbo Chargers Rebuild Kit
Fuel oil line & fitting
◈  Fuel oil line
◈  Fuel oil fitting
Other
Hot Item
2.5'' Inch Stainless Steel V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes
USD 14.29
2" Front Leveling lift kit Fit Chevy Silverado GMC Sierra GM 1500 LM 07-17 Black
USD 17.99
Forged/Front 1-3" Leveling Kit W/ Shock Extender Fits GMC Chevy 2500 3500 99-13
USD 31.99
1PC 2.75" (2.99"-3.31") 301 Stainless Steel T Bolt Clamps Clamp 77mm-85mm
USD 3.46
LED Submersible Square Trailer Tail Lights Under 80" Brake Boat Stud Mount
USD 21.00
Picture
New List Item
30 Series 1" Bore Torque Converter Driver Clutch Fit Manco 8190 219554A w/ Belt
USD 29.45
(1X) 40 SERIES BELT TORQUE CONVERTER GO KART COMET203785A COMET203785 MANCO12346
USD 8.55
Timing Chain Kit Phaser Oil Water Pump Timing Tool For Ford F150 Lincoln 5.4L
USD 280.99
For 2013-2015 Chevy Malibu LT LTZ Projector Headlight Headlamp Passenger Side
USD 114.89
3” Front Leveling Lift Kit For 2004 2006 2010 2WD & 4WD 04-17 Ford F150 New
USD 42.77
7" FMIC Intercooler Upgrade Fits 2007-2013 BMW 135i 335i N54 N55
Product Description
2007-2013 BMW 135i/335i N54 & N55 7" Street Intercooler Upgrade Kit
Replace your overheated factory intercooler with the upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
Intercooler Core
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heatsoak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our custom bar and plate core design which utilizes a staggered and offset high density internal and external fin pack. Our core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.
Our 5" core is recommended for those with goals of 300-500whp. We recommend our 7" intercooler for individuals requiring the utmost intake temperature reduction, ranging from the stock turbo setup to single turbo
100% brand new, never been tried of installed.
High Desnity Bar & Plate Core
Cast Aluminum End Tanks
Up to 80% larger than the OEM intercooler
Easy install, less than 2.5 hours
Dimensions: 7" - 20x5.75x7.125" / 5" - 20x8x5"
Professional installation recommended.
No instruction included.
Fitment：
2007-2011 E90/E91/E92/E93 BMW 335i/xi
2011-2012 E92 BMW 335is
2008-2011 E82 BMW 135i
Package including：
1X FMIC Intercooler
As Pictures Show
Payment
We accept eBay payment and other payments through eBay payment
Shipping
Items will be shipped within 1 business days after your payment is cleared.
All Customer's items will be shipped from our CA or NJ warehourse
Import duties, taxes and charges are not included in the item price or shipping charges
International orders may take 1~3 weeks to arrive
Returns
You can return your
unused items back for exchange or refund within 60 days
.
Please contact us for return process before you return the item.
Customer service
Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.