Agilent M9703A AXIe 12-bit High-Speed Digitizer/Wideband Digital Receiver CAL'D

Description

Powered by
Frooition
Shop Categories
Amplifiers
Analyzers
Cable & Antenna Analyzers
Cables
Calibration Kits
Calibrators
Counters / Timers
Detectors
Emulators
Error Detectors
Logic Analyzers
Meters
Modules / Plug Ins
Multimeters
Network Analyzers
Noise Generators
Noise Sources
Optical
Optical Spectrum Analyzers
Oscilloscopes
Other
Pattern Generators
Power Meters
Power Sensors
Power Supplies
Probes
RF / Microwave
Service Monitors / Test Sets
Signal Analyzers
Signal Generators
Spectrum Analyzers
Thermal Imagers
VXI
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Keysight / Agilent M9703A AXIe 12-bit High-Speed Digitizer/Wideband Digital Receiver - LOADED & CALIBRATED!
Item Description
Keysight / Agilent M9703A AXIe 12-bit High-Speed Digitizer / Wideband Digital Receiver Loaded with Options - CALIBRATED!
You are bidding on an Agilent / Keysight M9703A AXIe 12-bit High-Speed Digitizer/Wideband Digital Receiver with Options DGT (Digitizer Firmware), F10 (
Input frequency: DC to 2 GHz (not interleaved); DC to 1 GHz (interleaved)
, INT (
Interleaved Channel Sampling Functionality), LX2 (Digital Processing U
nit FPGA LX195), M40 (
4 GB (256 MS/ch) Acquisition Memory
) and SR2 (
1.6 GS/s Sampling Rate
).  It will arrive with calibration certificate and test data performed by Keysight Technologies
at a cost of over 00 USD!
The M9703A with this option configuration has a
list price over 50K!
Based on the AXIe Standard, the M9703A is an 8-channel, 12-bit wideband digital receiver/digitizer, able to capture signals from DC up to 2 GHz at 1.6GS/s. A channel interleaving capability allows waveform acquisition at up to 3.2 GS/s with exceptional measurement accuracy.
The M9703A also provides real-time data processing with four Virtex 6 FPGAs and very long acquisition capability which can be accessed for custom processing implementation with the W1462BP SystemVue FPGA Architect. The SystemVue ESL design software provides an integrated design-to-test flow, with rich communication and A/D processing libraries as well as an automatic push button programming approach, allowing to accelerate customer’s design.
The M9703A FPGAs optionally feature real-time digital downconversion (DDC), allowing tuning and zooming on the signals to be analyzed. The DDCs improve the dynamic range, reduces the noise floor, and extends the capture time for an accelerated measurement speed. This feature also enables an accelerated connection to the software measurement layer, such as the 89600 Vector Signal Analysis, for faster signal analysis.
The multi-module processing synchronization allows building a system of >100 phase-coherent channels with the M9514A 14-slot AXIe chassis.
Key Features & Specifications
Applications
Multi-channel applications requiring phase coherency, wideband frequency analysis, high dynamic range
Radar and satellite: antenna array calibration and test, electronic warfare (EW) radar emulation, passive radar receiver, or multi-band SATCOM monitoring
RF Communications: Multichannel Baseband-IQ (BBIQ) and wideband MIMO for emerging standards research (e.g. 5G)
Advanced research large scale experiments in hydrodynamics, plasma fusion (Tokamak/Stellarator), particle physics, or microwave astronomy
Functionality
8 channels of DC to 2 GHz input frequency range, 12-bit resolution
Up to 3.2 GS/s sampling rate (when interleaved)
Multi-module processing synchronization for >100 phase coherent channels
On-board FPGAs for custom processing or OTS wideband real-time DDC
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a fresh calibration and a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.  Technical specifications above are provided for reference only.  Buyers are expected to do their own research to determine if the instrument's capabilities are sufficient for the applicable project.  We do not offer returns for equipment purchased in error.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
our other auctions
for more great deals on test and measurement equipment.
Thank you and good luck bidding
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.  Spaulding Surplus 1109 Antelope Place Newbury Park, CA 91320.
Shipping
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
Terms
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Returns
Returns
Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project.  The verification of product capability is the sole responsibility of the buyer.  PO’s and purchases cancelled due to insufficient instrument capability, buyer’s remorse or loss of order are always subject to a minimum 20% restocking fee.  A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
More Items!
View more great items
Agilent N4956A 12.5Gb/s Error Detector Head, N4965A Serial BERT Controller CAL'D
&dollar1,950.00
Agilent/Keysight 86107A w/ Opt 10 Precision Timebase Reference Module CALIBRATED
&dollar28,500.00
Agilent / HP 83592A 10 MHz to 20 GHz RF Sweeper Plug In with Option 2 - TESTED!
&dollar2,950.00
Agilent HP 83572B 26.5 - 40 GHz High Power RF Plug-In with Option 6 - TESTED!
&dollar6,990.00
Powered by
Frooition
Frooition www.frooition.com | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.