Dental Endo Heated Pen / Gutta Percha Cutter /Heating Tips Obturating Points

Description

Feature：
Model：
Op-fill can be heat to 200 º C in 3s, can be melting all kinds of Gutta percha.It support the vertical compaction of Gutta percha for the root canal filling. It is intended exclusively for use by trained dentiet only in clinic or laboratory.
Safety caution:
The temperature of tip is very high during the surgery , in order to prevent from being burned, please avoid it directly contact to the soft tissue.
Specification：
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat:
Press the button to heat the tip, the Led indicator light red.The tip can reach working temperature within 3 second.
Charge:
Put the obturation pen onto the charging base, the LED indicator light blue.The unit should be continuous charging more than 8 hours from low voltage to full charge.
Package includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
Pen Tip -----2PCS
+
A-BLADE Gutta Percha /Tooth gum Cutter with 4 tips
Feature：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical：
1. Charger voltage: 110V / 220V, 50-60Hz
2. Battery: 1.2V 2400mAh
3. Power: 2.5W
4. Weight:0.35kg
5. Packing size: 15 x 12 x 3.5 (CM
Charging
1, First,charge the instrument by connecting the charging station to a mains power socket
2, Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use: Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important: Never bend the tip while it is still in the handpiece.
1, Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2, As soon as the cutting tip is located directly on the canal access,press the operating button.
3, The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4, After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5, Remove the cutting tip from the handpiece after use.
Important:Please don＇t continue to press the button more than 30 seconds.
1Pack Dental Root-Canal Obturating Points
Size: F1-F3
Packing: 60 Pcs/Pack
Size avaiable: F1, F2, F3, F1-F3
Descriptions:
1. Universal Gutta Percha Points match the shape of the the Universal Finishing Files and are colour-coded for easy identification.
2. Available in sizes F1, F2, F3, and F1-F3 assortment packs with 60 Universal Gutta Percha Points per pack.
3. The advanced Universal Gutta Percha Points have been specifically designed for both cold and warm obturation techniques.
Features:
For all warm or cold obturations
The high quality level of our gutta-percha points offers you the precision required for optimal obturation results
Reliable insertion down to the apex
Taper: from 0.02 to 0.06
Available in monochrome white in order to avoid tooth darkening.
Heated Gutta Cutter Tips
Description:
Packing: 4Pcs/pack
Net Weight: 10.4g
For Gutta Percha Point Heating Cutter Tooth Gum
Warning:
Before each patient, the cutting tips must be cleaned and sterilized
*Any residues remain on the tip can be removed by cotton wool.
*When used properly, the tips can be autoclaved on more than 25 times(at 121℃ at least 20 minutes and at 132℃/134℃ at least 5 minutes).
QTY:4Pcs/pack