-40%
NEW NATIONAL INSTRUMENTS 77387 PCI-DIO-96 and NI-DAQ FOR WINDOWS
$ 137.27
- Description
- Size Guide
Description
THIS IS BRAND NEW NEVER USE ITEMSoftware comes with the card in the box. And it also can be downloaded from National Instrument website.
The
NI PCI-DIO-96
(Part Number:
777387-01
) is a 96 Channel
Digital I/O Interface
featured with TTL/CMOS, bidirectional and unidirectional characteristics, and 2-wire handshake capability. This
I/O Interface
is entirely compatible with the NI-DAQmx driver. Thus, it can be configured directly. The
NI PCI-DIO-96
comes equipped with four PPI or Programmable Peripheral Interface chips, which are used for the controlling of all 96 bits. For additional functions such as amplification, excitation, and isolation signal generation for relays, the user can always go with the SCXI modules and accessories available and sold separately by
National Instruments.
This board makes it possible for the user to utilize their computer as a digital I/O system for laboratory testing, industrial process management, and productions testing. The
NI PCI-DIO-96
features an 82C53 programmable
interval timer, which can be used for register-level programming. The interval timer can also generate timed interrupt commands directly to the user’s computer.
The
NI PCI-DIO-96
is fully compatible with the PCI Local Bus Specification, Revision 2.1. It also tends to operate with a known power-up state. This module can easily be used with the LabVIEW Application Builder for Windows and LabVIEW Full Development System for Windows. This model contains bias resistors that control the power-up state of the digital I/O lines. At power up, each I/O line is pulled either high or low, employing a 100 kΩ bias resistor. The default power state of each digital I/O line is high because in this model all the 100 kΩ bias resistors pull up on the device startup.
PCI-DIO-96 Technical Specifications:
Manufacturer:
National Instruments
Model:
PCI-DIO-96
Part Number:
777387-01
Type:
Digital I/O Interface