Solar Water Pump Kit System：200W Solar Panel Kits 12V Submersible Well Pump

Description

About this item
[ Feature ] - This solar-powered pump kit is made up of highly efficient solar panel and submersible water pump. Start-up fast, efficient and strong stability.
[ Use For ] - 4'' wells or larger. Suitable for pond, garden fountains, water circulation etc .
[ Caution ] - Please avoid to make the pump work without water for a long time, or its lifespan will be shortened. Clean the pump regularly .
[ Manual ] - As the solar panel is depended on the sunlight, the pump would be influenced by weather, seasons and places etc .
[ Update ] - 4 work modes of controller for protecting pump and controller from continuous working , it helps to keep lifespan lasting longer .
Nongeographic Restrictions & Wide Application - Perfect Choice for the Remote Watering Needs without Electric Power!
How to Install efficiently?
I
n an ideal home or industrial solar installation, your home would have a large, sunny, south-facing roof or frame with a 20~30-degree pitch.
Solar panels can be installed on most roofs/frames or so you can save on your electricity costs and help the environment, too.
PACKAGE INCLUDING
2pcs 100 Watts Monocrystalline Solar Panels
1pc 12 Volts Submersible Well Pump
1pc 20A Solar Charge Controller
1 pair of 16.4ft Solar Cable with Adapter
1 pair of Y Branch Connector for Connecting Solar Panels IN PARALLEL
High Efficient 100W Monocrystalline Solar Panel
Rated power: 100W
Open-Circuit Voltage (Voc): 21.6V
Short circuit current (Isc): 6.13A
Working current (Iop): 5.78A
Output Tolerance: ±3%
Temperature range: -40℃to +80℃
The promise of power: 90% within 10 years, 80% within 25 years.
Battery Voltage: 12V
Size: 39.8*20.1*1.4 inch
Weight:18.96 pounds
Easy Installation
Installation Tip 1:
It is suggested to be connected with solar panel directly. To get the largest water flow, you can use the solar panel to charge the solar pump directly, don't need to set up the battery or charge controller.
Installation Tip 2:
The water pump also can be supported by batteries if you need the flexibility of pumping on demand at any time. You need to connect the solar panels IN PARALLEL, and connect the charge controller to the battery and solar panel, then connect to
Large Flow Solar Water Pump
Voltage: 12V DC
Amps: 8.0 Max
Flow Rate(lph/gph): 6LPM/1.6GPM
Maximum Lift: 230ft (70m)
Maximum Submersion: 100ft (30m)
Cable Length: 10ft (3m)
Inlet: 50 Mesh Stainless Steel Screen
Outlet Port: 1/2''(12.7mm) Barbed Fitting
Motor: Permanent Magnet Thermally Protected
Package Size: 13.97x4.33x5.12in
20A PWM LCD Dispaly Controller
Battery voltage: 12V/24V auto
Charge current: 20A
Working current: 5.5A
Usb port: 5V/2A
Size/Weight: 138*85*30mm /150g
This controller can handle up to 360W (12V system) or 720W (24V system)